We use this to load the right factory defaults — and to know whether your printer has an enclosed build chamber.
If you never swapped the nozzle, it’s the standard 0.4 mm.
It’s printed on the spool or the box — PLA is the most common one by far.
Pick your brand for the maker’s own temperature & drying specs — or “Not sure / generic” for safe baselines.
Filament absorbs moisture from the air — wet filament is the #1 hidden cause of print problems.
Not sure? The gold textured plate is the one that ships with most Bambu printers.
Pick everything that matches — the pictures show each problem.
or tell us what’s wrong
Select at least one symptom to continue.
These values are qualified starting points based on the manufacturers’ official slicer profiles and known troubleshooting — not guarantees. Change one thing at a time and run a small test print in between, so you know exactly what fixed it.